Jim Dunlop Cry Baby Mini Wah Guitar Pedal

This Cry Baby Wah packs three different wah voicings to cover most of your tonal needs—Low, Vintage, GCB95—into a housing that's half the standard size and features true bypass switching.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).

Directions:

1. Run a shielded instrument cable from your guitar to the CBM95’s INSTRUMENT jack.
2. Run another shielded instrument cable from the CBM95’s AMPLIFIER jack into your amplifier input.
3. Turn on the amplifier and begin playing.
4. To turn the pedal on/off, push the toe of the pedal down until you feel a “click.”
5. By rocking your foot back and forth on the mini pedal, you can instantaneously change the effect that the Cry Baby Wah has on the tone of your instrument.
6. Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance the rocker has to being moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance (Wrench included). See Diagram A
7. Internal VOICING switch allows you to change the frequency range of the CBM95. To access, remove bottom plate. Default setting is H—High, for the standard GCB95 sound. For a more vintage, midrange-focused sound, set the switch to M. For the lower frequency range used in our Jimi Hendrix Wah, select L.

Specifications:

• Impedance
  • Input: 800 kΩ
  • Output: 10 kΩ
  • Resonant Frequency
    • Heel Down: 350 Hz - 450 Hz
    • Toe Down: 1.5 kHz - 2.5 kHz
    • Maximum Level
      • Input: -8.0 dBV
      • Output: +10 dBV
      • Maximum Gain
        • Heel Down: +19.5 dB
        • Toe Down: +19.0 dB
        • Bypass True Hardwire
        • Noise Floor*
          • Heel Down: -98 dBV
          • Toe Down: -89 dBV
          • Current Draw: 900 µA