Jim Dunlop Straplok Original Strap Retainer System - Gold

Brand:  JIM DUNLOP

MODEL:  SLS1104G

Jim Dunlop Straplok Original Strap Retainer System - Gold
Easy Payment Plan
Easy Payment Plans
i
Same-day to 2-day delivery
Check availability in store

Set adapts to instrument by replacing existing strap pins/screws with special Straplok System button/screws.

Two strap attachments are included.

Original slim button design.

  • INSTALLATION INSTRUCTIONS
  • Please follow instructions very carefully and use
  • all provided parts. If you do not feel comfortable
  • performing this installation yourself, have it done
  • by a reputable luthier or guitar repair technician.
  • Locking Pin Assembly:
  • 1. Slip locking pin (1) through the recessed washer (2).
  • 2. Insert locking pin (1) through strap hole (3).
  • 3. Slip flat washer (4) over locking pin (1)
  • against strap (3).
  • 4. Snap retainer clip (5) into locking pin’s
  • shank groove (1).
  • Strap Button Instructions:
  • 1. Secure body of instrument to a flat surface such
  • as a table or workbench and remove existing strap
  • buttons.If neck is bolted on,remove it for easier
  • access.
  • 2. With a 7/64ʺ bit, drill 7/8” deep into existing
  • strap button hole.
  • 3. Place strap button (6) over hole. Lubricate tip
  • of mounting screw (7) with a small amount of wax or
  • bar soap and screw it into the strap button hole with a
  • #2 Phillips screwdriver.
  • 4. Rotate clockwise until snug.
  • 5. Repeat for other Straplok button
View full description
Loyalty dots logo
Earn 0 loyalty dots equivalent to OMR 0 when you sign-in and order
Easy Payment Plan
Easy Payment Plans
i

Set adapts to instrument by replacing existing strap pins/screws with special Straplok System button/screws.

Two strap attachments are included.

Original slim button design.

  • INSTALLATION INSTRUCTIONS
  • Please follow instructions very carefully and use
  • all provided parts. If you do not feel comfortable
  • performing this installation yourself, have it done
  • by a reputable luthier or guitar repair technician.
  • Locking Pin Assembly:
  • 1. Slip locking pin (1) through the recessed washer (2).
  • 2. Insert locking pin (1) through strap hole (3).
  • 3. Slip flat washer (4) over locking pin (1)
  • against strap (3).
  • 4. Snap retainer clip (5) into locking pin’s
  • shank groove (1).
  • Strap Button Instructions:
  • 1. Secure body of instrument to a flat surface such
  • as a table or workbench and remove existing strap
  • buttons.If neck is bolted on,remove it for easier
  • access.
  • 2. With a 7/64ʺ bit, drill 7/8” deep into existing
  • strap button hole.
  • 3. Place strap button (6) over hole. Lubricate tip
  • of mounting screw (7) with a small amount of wax or
  • bar soap and screw it into the strap button hole with a
  • #2 Phillips screwdriver.
  • 4. Rotate clockwise until snug.
  • 5. Repeat for other Straplok button
View full description
View less description
Customers